Chamber Ovens up to 260 °C

A wide range of accessories allow the chamber ovens to be modified to meet specific process requirements.

The chamber ovens of the KTR range can be used for complex drying processes and heat treatment of charges to an application temperature of 260 °C. The high-performance air circulation enables optimum temperature uniformity throughout the work space. A wide range of accessories allow the chamber ovens to be modified to meet specific process requirements.

Standard Equipment

Tmax 260 °C
Electrically heated (via a heating register with integrated chrome steel heating elements) or gas-fired (direct or indirect gas-fired including injection of the hot air into the intake duct)
Temperature uniformity up to +/− 3 °C according to DIN 17052-1 (for design wihout track cutouts)
High-quality mineral wool insulation provides for outer temperatures of < 25 °C above room temperature
Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
High air exchange for fast drying processes
Double-wing door for furnaces KTR 2300 and larger
Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
Controller with touch operation B500 (5 prgrams with each 4 segments)
Defined application within the constraints of the operating instructions
NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Additional Equipment

Direct or indirect gas-fired
Base frame to charge the oven via a charging forklift
Additional door in the back for charging from both sides or to use the oven as lock between two rooms
Fan system for faster cooling with manual or motorized control of the exhaust flaps
Programmed opening and closing of exhaust air flaps
Air circulation with speed control, recommendable for processes with light or sensitive charge
Observation window and furnace chamber lighting
Design for clean room heat treatment processes
Rotating systems e. g. for tempering processes
All KTR-models are also available with Tmax 300 °C
Process control and documentation via VCD software package or Nabertherm Control Center (NCC) for monitoring, documentation and control

Chamber Ovens up to 260 °C

A wide range of accessories allow the chamber ovens to be modified to meet specific process requirements.

Standard Equipment

Additional Equipment

Chamber Ovens up to 260 °C